3 Ways to Draw Bubble Letters - wikiHow (2024)

Explore this Article

Co-authored bywikiHow Staff

Last Updated: April 22, 2022Tested

ARTICLE

VIDEO

Sample Alphabets

Download Article

1. 1

   Sketch a lowercase or capital letter in pencil. Start with whatever letter you want. A simple capital letter, like "A," is a good place to begin, but you can use the exact same technique for lowercase letters, too. Don’t worry about making this letter look perfect, because it is just a guiding line – you’ll erase it later.^[1]

   • Once you’ve gotten the hang of drawing bubble letters, you won’t need to draw the interior guiding letters anymore.
2. 

   2

   Draw an outline around the letter with rounded edges. With your pencil, trace around the outside of your letter, leaving the same amount of space between the original letter and your new outline on all sides of the letter. Make sure to round off the edges and corners so that your bubble letters look soft, not like block letters.^[2]

   • You can draw as many outlines as you want, until you find one that is a thickness you like.

   Advertisem*nt

3. 

   3

   Pencil ovals over each line of your letter as an alternative. If you found it hard to draw an outline around the whole letter, you can draw individual ovals for each line of the letter. For straight lines, like the sides of the letter “A,” you can just draw one oval per line. For a curved line, like the letter “C,” you’ll have to use multiple ovals to cover the whole line.^[3]

   • Experiment with different thicknesses of ovals to see what kind you like. You can even have the ovals be so wide that they touch.
   • Your ovals will overlap, but that’s okay, since you will erase the interior lines.
4. 

   See Also

   Create Stunning Bubble Letters A-Z: Tips and TechniquesFree Printable Bubble Letters Alphabet - Freebie Finding Mom

   4

   Sketch little circles or triangles inside the loops of letters. For example, for a “B,” you could draw two little circles, one in each hole in the letter. For an “e,” you would only need one circle inside the upper loop of the letter. For an “A,” you could use a triangle in the upper middle part of the letter.^[4]

   • You can shade in the little triangles and circles or leave them open.
5. 5

   Outline the outside of the letters with pen or marker. Make sure you avoid going over any interior or overlapping lines. For example, if you wrote a “F,” you shouldn’t trace over the lines where the short lines overlap with the long vertical line. Similarly, for an “x,” the part where the two lines overlap should be empty, and you should just trace around the outside in pen.^[5]

   • The pencil marks are just there to guide you in drawing your bubble letter; you don’t have to stick to them exactly.
   • Feel free to accentuate the curves and make adjustments as you outline your letter.
6. 

   6

   Erase all your pencil marks. Make sure you erase all the inside pencil marks so there are no visible marks. Once you’ve erased the construction lines, you’ll be left with nothing but your beautiful bubble letter.^[6]

   • Brush off the eraser shavings as you go, so they don’t get in the way of further drawing.

Advertisem*nt

Download Article

1. 

   1

   Draw cast shadows on one side of your letters. Add a black edge along one side of your letters with pen or marker, to make it look like the letters are casting shadows. It’s important to be consistent about which side of the letter your shadows are on for all the letters. Remember to include shadows on the small inside holes of letters, too.^[7]

   • It can help to imagine a light source in one particular part of your page. For example, if your light source was on the upper left of your page, it would cast shadows on the lower right of the letters.
2. 

   2

   Fill in your letters with a color gradient using colored pencils or markers. For example, if your light source is coming from above, you could shade in your letters using a dark blue on the bottom of your letter and a light blue on top. You could also use different colors, like red on the bottom and yellow on the top.^[8]

   • Get creative with your colors – use as many different colors in one letter as you want.
3. 

   3

   Color in your letters with fun patterns as an alternative. Fill in your bubble letters however you want. Try polka-dots, zebra print, stripes, spirals, stars, hearts, or zig-zags. Experiment with different colors and find out which designs you like best.^[9]

   • You can also make one pattern across all your letters for a more cohesive look.
   • Use colored pencils, markers, crayons, or really whatever you want to color in your bubble letters.

Advertisem*nt

Community Q&A

Ask a Question

Video.

By using this service, some information may be shared with YouTube.

Things You’ll Need

Tips

Thanks for submitting a tip for review!

56 votes - 73%